|
Request a Mold Inspection | Mold Inspection Service
Mold
Testing Service
Inspections Anywhere in Georgia, Florida, South Carolina, North Carolina
When the inspector arrives at the property location, he
performs a thorough visual inspection of the property. The visual
inspection for the area outside of the property consists of:
- Inspecting the foundation of the property for cracks
- Inspecting any cracks on the property itself
- Inspecting the grading of the property
- Inspecting the drainage spouts and making sure they draining away
from the house
- Inspect sprinklers, if applicable, to ensure they are not spraying
on the house
- Inspect shrubbery to ensure they have adequate spacing from them
to the foundation
- Inspect windows and doors to ensure proper caulking and sealing
- Inspect roofing for missing or damaged shingles
- Inspect house or dwelling for visible water damage or staining
of building materials which could lead to possible inside water
intrusion
The visual inspection for the area inside of the
property consists of:
- Inspecting all areas inside the property or (only
areas the client allocates)
- Inspecting each wall from ceiling to flooring
- Inspecting the HVAC system, including coils, supply
and return vents as well as visible duct work.
- Inspecting all areas with moisture meters, temperature,
and humidity readings.
Mold Testing Service
The inspector will take samples of the mold, airborne or surface
and send them to a professional CERTIFIED laboratory. Tape/Bulk/Swab
(taking samples of the visible mold):
- Air Sample (taking non-visible air spores)
- Tape sample
- Sterilized Swab
- Inner Wall Air Sample if no visible mold is present and moisture
readings are high
Also available at additional cost:
- Viable sampling ( used for culturing to determine exact species
of growth )
The laboratory results will take approximately 24 to 72 hours. When
the results are given to Mold Institute USA, we immediately complete
a full detailed report and hand deliver a copy of the results to
the client with a letter explaining what molds were found.
Residential Pricing
Basic Inspection price with 3 samples included! (up to 2000 sq feet)
= Call for pricing
Prices are based on clients request for analysis turn around time
and the number of samples needed. Most common is 72 hour turn around
time. Where as the culture samples are 14 day turn around time.
**NOTE** Culture samples cannot be any faster, they require 14 day
growth time for accuracy.
Commercial
Pricing available by bids only. The inspector will have to do a
FREE visual preliminary inspection to calculate the size of the dwelling,
the amount of samples that will be required, and possibly the amount
of employees needed to complete the job in a timely manner. (In most
cases, only one inspector is ever required.)
Request a Mold Inspection
|
